Previous  Up  Next 
Magpul PMAG M3 10 Round 20 Body Magazine .223/5.56mm


Show Picture 1Show Picture 2Show Picture 3

Magpul PMAG M3 10 Round 20 Body Magazine .223/5.56mm

Magpul PMAG M3 10 Round 20 Body Magazine .223/5.56mm

The PMAG™ (Polymer MAGazine) is a lightweight 5.56 NATO, M-16 compatible magazine. The newest iteration, the Magpul PMAG 10rd in 20rd M3 AR15 Magazine PMAG™ body utilizes a resilient stainless steel spring for corrosion resistance and features a thinner profile, a smaller baseplate and a higher profile gripping surface.

Please Note
:  Magpul does not manufacture this blocked magazine.  These magazines are modified by RifleGear for sale in states with magazine capacity bans.  The magazines are designed to comply with capacity restrictions, but are not guaranteed to insert easily on a closed bolt when loaded to full capacity.  These magazines are permanently modified and the floor plate cannot be removed. RifleGear will handle any warranty claim on this product.  Please contact RifleGear if you receive a defective magazine.

These magazines are permanently modified and the floor plate cannot be readily removed. Please do not order this magazine if your intention is to modify it back into a high-capacity magazine. There are plenty of vendors on the internet that sell "magazine rebuild kits" that may better suit your needs.

Restrictions
Magazine capacities are regulated in many states and jurisdictions.  Please understand your local laws prior to ordering. Click here for detailed information on magazine capacity restrictions.


(see full description below)

Choose your Magpul PMAG M3 10 Round 20 Body Magazine .223/5.56mm

Black
Black
Price: $24.99 
SKU: MAG1020-BLK
In stock
as of 10/25/2014 2:59AM PST

Quantity:  
Flat Dark Earth
Flat Dark Earth
Price: $24.99 
SKU: MAG1020-FDE
Out of stock
as of 10/25/2014 2:59AM PST

Enter your email address below to receive an email when the product is back in stock:

Olive Drab
Olive Drab
Price: $24.99 
SKU: MAG1020-ODG
Out of stock
as of 10/25/2014 2:59AM PST

Enter your email address below to receive an email when the product is back in stock:

The PMAG™ (Polymer MAGazine) is a lightweight 5.56 NATO, M-16 compatible magazine. The newest iteration, the Magpul PMAG 10rd in 20rd M3 AR15 Magazine PMAG™ body utilizes a resilient stainless steel spring for corrosion resistance and features a thinner profile, a smaller baseplate and a higher profile gripping surface. The Magpul PMAG 10rd in 20rd M3 AR15 Magazine body has a special smaller sized baseplate designed to allow virtually full contact for multiple magazines when they are stacked or stored together. 

Features
Constant-curve internal geometry for smooth feeding
Anti-tilt, self-lubricating follower for increased reliability
Stainless steel spring for corrosion resistance
Textured gripping surface

Compatibility: AR15, M16, M4, HK416, FN SCAR 16/16S, SA-80, M27


Please Note
:  Magpul does not manufacture this blocked magazine.  These magazines are modified by RifleGear for sale in states with magazine capacity bans.  The magazines are designed to comply with capacity restrictions, but are not guaranteed to insert easily on a closed bolt when loaded to full capacity.  These magazines are permanently modified and the floor plate cannot be removed. RifleGear will handle any warranty claim on this product.  Please contact RifleGear if you receive a defective magazine.

These magazines are permanently modified and the floor plate cannot be readily removed. Please do not order this magazine if your intention is to modify it back into a high-capacity magazine. There are plenty of vendors on the internet that sell "magazine rebuild kits" that may better suit your needs.

Restrictions
Magazine capacities are regulated in many states and jurisdictions.  Please understand your local laws prior to ordering. Click here for detailed information on magazine capacity restrictions.



Rating: (4.72)   # of Ratings: 25   (Only registered customers can rate)

(Only registered customers can rate)

5 star
4 star
3 star
2 star
1 star
0% 50% 100%

Sort:

Showing comments 1-10 of 24 (Next 10) Click Here to see all comments
1. Erik on 4/14/2013, said:

These have the old black followers that lack the full anit-tilt feature of the gray magpul followers. The two biggest problems as a result are (1) fails to feed properly and (2) fails lock bolt back after last round (that is when you can get it to feed rounds).
Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not)
2. JASON on 12/31/2012, said:

Only got 4 :(
Was this comment helpful? yes no   (0 people found this comment helpful, 0 did not)
3. David on 4/17/2012, said:

Bought 2 of these 10/20 body pmags. They're great! Thanks riflegear!
Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not)
4. Terry on 4/13/2012, said:

Anti tilt Followers, perfectly blocked at 10 rounds and still seats on a closed bolt. I couldn't ask for more, unless I was being an A**hole
Was this comment helpful? yes no   (2 people found this comment helpful, 0 did not)
5. Marco on 3/23/2012, said:

Magpul and Riflegear, perfect combo. Thanks for this great product!
Was this comment helpful? yes no   (0 people found this comment helpful, 0 did not)
6. Mary on 2/4/2012, said:

MAGPUL What else can u say. 3 od green 30 rd mags match up perfect with the magpul forearm. Perfect fit and function yesterday in the field. Love the dust cover and grip ridges.Getting a 20rd next for bench shooting. You better get them now before the military catches on.
Was this comment helpful? yes no   (0 people found this comment helpful, 0 did not)
7. William on 7/29/2011, said:

Works as advertised. The 10 round conversion results in a non-removable floorplate fyi. Fed lots of rounds through a LMT MRP with no malfunctions.
Was this comment helpful? yes no   (3 people found this comment helpful, 1 did not)
8. Edward on 4/15/2011, said:

Im probably going to get a lot of heat from everyone that loves Magpul, these were my very first I ordered 2...I ran them through my Stag arms AR-15 and it would not feed at all.. I swapped them out for my regular stock aluminum mag and no jams I went back and forth and magpul jammed everytime...I even used another guys non Magpul aluminum mag and zero jams again. Im guessing both mine were defective or not broken in yet, but really dissapointed that cheapo mags worked way better and reliably than the Magpul...Im willing to give them another shot though!
Was this comment helpful? yes no   (5 people found this comment helpful, 6 did not)
9. Sergio on 3/10/2011, said:

Awesome magazine, looks great fits great and feels great! Worth the bucks, will not get any other brand in the future!
Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not)
10. Jason on 1/29/2011, said:

picked up 3 of these, went to the range and put about 500 rounds through my set of 3 on the first day. no jams or double feeds due to these magazines. you will be happy with them.
Was this comment helpful? yes no   (3 people found this comment helpful, 0 did not)
Showing comments 1-10 of 24 (Next 10) Click Here to see all comments




Customers Also Bought