Daniel Defense DDM4 MK18 5.56mm 10.3" SBR, FDE

$2,087.00
In stock
as of 03/28/2024 5:52AM CST
Store Inventory
Available Online1
Fountain Valley, CAOut of stock
The Colony, TX1
SKU: DA-02-088-17024
MPN: 02-088-17024
UPC: 815604015554


Inter-Store Transfer

If this item is out of stock at your local RifleGear but available at our other location, no problem. Just place your order and select In-Store Pickup as the shipping method. As long as the item is legal in your location, we will transfer the item for you. You will be notified by email once your item has arrived at the destination.

Use what “THEY” use. The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged Barrel.  The MK18 rail system features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3” barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

Materials & Construction
Lower Receiver Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
Upper Receiver Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
Barrel Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
Gas System Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
Muzzle Device Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
Bolt Carrier Group M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
Buffer H Buffer
Sights Sold Separately
Handguard Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
Receiver Extension 6 Position Mil-Spec 7075-T6 Aluminum
Buttstock Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
Pistol Grip Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
Rail Panels Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
Made in the USA!

Specifications
Caliber 5.56 NATO
Capacity 32 Rounds
Barrel Length 10.3"
Gas System Carbine
Weight 5.88 lbs.
Length 26 3/4" - 29 7/8"
Case Plastic Case


*Not available for California and Restricted States.

This item has to be shipped to a licensed class III dealer. All NFA rules apply.

Important note about our photos
While we make every effort to ensure that our product photos are accurate, manufacturers occasionally change the design of components such as triggers, sights, or magazines without notice. Also, modifications to the firearm or component may be required in order to meet specific state compliance requirements. While we make every effort to accurately describe and illustrate the item you are going to receive, there may be visual differences on various components that do not affect functionality.

Restrictions
Federal law requires that you be 21 years of age or older to purchase a handgun, frame or receiver. To purchase a shotgun or rifle, you must be 18 years of age or older. 18 U.S.C. Section 922(b)(1).

As required by federal law, this item may only be shipped to a dealer with a valid Federal Firearms License. If you do not specify the name and shipping address of your dealer, your order will be delayed.
 Click here for more information on buying a gun online.  

California Residents
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

 


Customer Reviews

(0.00)stars out of 5
# of Ratings: 0