Your shopping cart is currently empty.
Area 419 ARCALock Clamp For B&T Atlas Bipods
$85.00
In stock
as of 04/27/2024 2:20PM CST
Store Inventory
Available Online5
Fountain Valley, CAOut of stock
The Colony, TX5
SKU: A419-ARCALOCK-CLAMP
- DESCRIPTION
- REVIEWS
Inter-Store Transfer
If this item is out of stock at your local RifleGear but available at our other location, no problem. Just place your order and select In-Store Pickup as the shipping method. As long as the item is legal in your location, we will transfer the item for you. You will be notified by email once your item has arrived at the destination.
Area 419 ARCALOCK Clamp is designed to direct mount to Atlas Bipods. Mounts to ARCA 1.5" dovetail rails.
Compatible with Atlas Bipods for ARCA Rails.
| Clamp Features: |
|---|
| – Proprietary two-stage screw design. |
| Clamping screw features two different thread pitches. The coarse 16tpi is used when no tension is on clamp, allowing rapid movement of the clamp vs others on the market. With high speed comes low torque though, so to counteract this as soon as the clamp sees tension it will switch to the 32tpi threads in the knob to give you extra torque when not using on an ARCALOCK rail. |
| ~1/4 turn releases the clamp from the detents on the ARCALOCK rail for movement |
| One turn fully releases clamp to be removed from rail |
| – Clamp directly bolts to Atlas Bipods using their factory hardware (excluding the 2-screw bipods. QD and NC only) |
| – Clamp to Atlas 2-screw bipods with Picatinny/1913 Adapter available HERE |
| – Barricade stop can either be standalone on the clamp using provided hardware, or sandwiched between an Atlas bipod. *Barricade stop does not directly work with Harris Bipods* |
| – Barricade Kit must be purchased for barricade stop use with Harris Bipods |
| – Harris Bipod adapter available immediately, find it HERE |
| – Clamp is backwards compatible with standard ARCA rails by removing the three pins, and will still work this way to give you infinite sliding adjustment on the ARCALOCK rail |
| – Moving side of clamp is dovetailed on both sides to prevent tilt |
| – Knob/Screw design prevents the clamp from being able to fall apart if you loosen it too far |
| – Clamp and knob machined in house from 6061-T6 Aluminum |
| – Screw is turned from 303 Stainless Steel |
| – Type III Hardcoat Black anodized clamp and Gold anodized knob |
| – Clamp Weight: 72.5 Grams |